WINDING SECTION

ABOUT

We manufacture manual electric motor winding products (coils before insulating varnish treatment).
From winding to product inspection, we have a large production capacity even though it is manual work, covering everything from prototypes to mass production.
Any of wattes, number of poles and adding accessories (temperature sensor, etc...) is possible within the range of round wires.
Of course, on manual process, the production capacity depends on the skills of each person,so through in-house training, and recruit human resources who have acquired production experience in Japan through the Technical Intern Training Program, We are constantly striving to improve our production capacity and secure the technical capabilities necessary for new fields.
As a result, it is possible to improve work efficiency, propose work content from the viewpoint of quality stability, investigate the cause when an abnormality occurs, and formulate a countermeasure plan.
Recently, we are training technical for human resources dispatched to Japan, collecting local supplier's necessary information (not only work content, production ability, economic stability, prototype instructions, etc...), local information on labor and factory operating costs for evaluation production in Vietnam, and have acquired the ability to make unique proposals to our customers.

PRODUCTION RESULTS

  • 01

    2-pole motor winding

    We accept requests for winding production related to 2-pole motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 02

    4-pole motor winding

    We accept requests for winding production related to 4-pole motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 03

    6-pole motor winding

    We accept requests for winding production related to 6-pole motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 04

    8-pole motor winding

    We accept requests for winding production related to 8-pole motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 05

    Special product

    motor winding

    We accept requests for winding production related to Special product motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 06

    Special product

    motor winding

    We accept requests for winding production related to Special product motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 07

    Special product

    motor winding

    We accept requests for winding production related to Special product motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 08

    Special product

    motor winding

    We accept requests for winding production related to Special product motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 09

    Special product

    motor winding

    We accept requests for winding production related to Special product motor windings, motor winding repairs, etc.
    Please feel free to contact us

  • 10

    Special product

    motor winding

    We accept requests for winding production related to Special product motor windings, motor winding repairs, etc.
    Please feel free to contact us

PROCESS INTRODUCTION

  • 01

    Winding process

  • 02

    Insert process

  • 03

    Conecting process

  • 04

    Testing process

MAIN EQUIPMENT

  • Winding machine

    It is used to mold the specified coil.
    The number of turns, number of bundles, etc. are set, but the operator performs wire holding and fine adjustment.

  • Winding pattern

    It is made by shaving hard wood. It is created by considering the size, depth of grooves, curvature of corners, etc.
    Once created, it can be used semi-permanently.

  • Electric wire supply

    Supply the wire to the winding machine.
    It is possible to supply up to 16 wires at the same time, even if they are different wire types and wire diameters.

  • Free winding mol

    The free winding former attached to the winding machine.
    The curvature and number of bundles cannot be changed, but the length and width can be changed to some extent.

  • Molding press

    This is a vertical press for adjusting the coil shape in the insertion process and the wire connection process.

CONTACT

Please contact us first for winding,
motor manufacturing,
motor repair, etc